Gearing up for Fabricated Motorsports' Lone Star Bash Round 1 - 03/24/13

Showing posts with label Rigid Industries. Show all posts
Showing posts with label Rigid Industries. Show all posts

Monday, September 9, 2013

MSA Drift Car "Kim": 2013 PowerCruise video

MSA's practce "fun" day at the Motor Sports Ranch Houston with the crew at the 2013 PowerCruise. Despite our travel woes (story here), the event turned out to be a great practice for Axle.  The goal...to get as close to the tire and concrete walls as possible.  That meant, skimming the paint off the rear bumper during initiation of the slide.  Watch the video to see how well he did.  While you're there, subscribe to our channel...  We'll have more videos of our events as we go through the seasons.

Friday, August 16, 2013

Formula D Pro/Am Round 5 preparations Part 1

So Round 5 will be our biggest event yet.  After not qualifying or placing in Round 2 from our transmission failure, we had to play catch up.  We have so far qualified mid range and finished 1st in the other rounds.  How we qualify and finish this round will determine the winner of the overall series.  We are currently 2nd in points standings.  However, if Tim (the current leader) qualifies higher and finishes slightly lower than us in Round 5 (say we get first and he wins second), he retains the overall points leader position, winning the series.  SO...game on.

We've been discussing a few things, and I won't disclose everything that's going on.  We have a "secret weapon" that we hope will give us the edge we need.  It's not something I'll disclose until the event, but it'll be pretty neat.

With our engine seeing compression as low as 112, we were averaging about 120.  Those are on the very low end of the spectrum, so we knew that it was getting weak.  The fear was that we would go out on the track, and the engine would just give up.  We definitely didn't want that to happen.  So the search began.  We ended up with CP Pistons and Eagle Rods, both of which received great reviews and had good prices.  Oil pump, water pump, and a few other goodies that came when we bought the engine will be swapped just in case.  We didn't want to get in a situation where either of these components failed during competition.  Although we had 10-15 minutes between runs to "fix" the car, we didn't want to be in that situation again.  Our manual boost controller was a great tool, but it still allowed for boost spikes.  So an EBC (electronic boost controller) is being installed for more control over the boost spectrum.

As of today, the motor is out.  Rods, Pistons, and the "secret weapon" have arrived.  ARP head bolts are on their way.  So to the machine shop the engine will go...

Overall, this will be a fun event, and we'll see what happens.  We are all on edge to see what will happen, and I'm sure our competitors who have read or seen our Facebook posts are all curious to see what we are doing.  Our little 350hp (estimated) SR20DET has done well keeping up with these 2JZ and other motor swapped cars with double our power.  We shall soon see who will be the victor in this year's battles.  It certainly has been an exciting one, and no matter the results, we plan on entering this series for the 2014 season as well.

Bryan Lin
CEO, The Motorsports Authority, Inc. | MSAStore.com | BCRacingDirect.com

Wednesday, July 10, 2013

Formula D Pro/AM Round 2 - Texas Motor Speedway - 4/28/13

This event will be otherwise known as the one that got away. What a week, and subsequent weekend! At this point it's even hard to remember the details given how terrible things turned out, but we learned a lot and I'll try to summarize what went down...

Team MSA had just returned from a demo event at Import Face Off in Ennis, TX. We gave 64 rides to very very happy passengers that day and had some amazing runs with the Fabricated Motorsports crew.


Following Brad Burnett in his 1UZ powered AE86
 Sadly 34 hotlaps + 20 minute lunch + 30 more hotlaps equals a blown stock turbo. We knew it would have to go at some point, luckily it decided to exit stage left at the end of the day. This meant we only had a few weeks to pull together a new setup for round 2 of the Lonestar Drift series. A few weeks may sound like a lot of time, but in our world of full time jobs and other responsibilities its barely enough!


Assessing the damage

We set out immediately researching and ordering the parts for our upgrade. Because the Fabricated Series largely centers around low to medium speed courses and close tandem battles we chose a Garrett 2860RS ball bearing turbo for its fast spool and broad powerband. To support the larger turbo we installed 550cc injectors, and moved to a Z32 mass air flow sensor. Engine management was handled with a plug and play RS-Enthalpy ECU. We also upgraded to an Apexi headgasket and ARP head studs. Helping this power to the ground is a new Competition Clutch Stage 4 clutch and lightweight flywheel setup. Many of these products were not in stock or were delayed in shipping, causing the final pieces of this puzzle to arrive only 3 days before our event. A mad rush ensued, with help from many friends and one too many nights going to sleep as the sun came up.





















This was the view at 11pm the night before the event. I immediately went into coma status as our fearless leader Bryan Lin set out for Texas Motor Speedway. The events that followed are so frustrating I can only barely stand to put them in chronological order...


50 miles outside of Texarkana - One trailer tire delaminates, replaced with spare, I'm so tired I don't even wake up
10 miles outside of Texarkana - Second trailer tire delaminates, no spare available, limp trailer to truck stop

Spend next few hours searching, unsuccessfully, for replacement tire/trailer, commence to sleeping in truck

Wake up at 8AM day of event still 3.5 hours away. Find out Wal Mart doesn't have tire we need. Unload car from trailer, put on set of tires and tools in car, leave for Texas Motor Speedway in Fort Worth at 9AM. Drive to Fort Worth with no license plates, manage not to get pulled over. Arrive at Texas Motor Speedway 30 minutes before qualifying.

Hit the track for our first practice lap, mind you i've never driven this course, shift into second and BAM, no second gear. Transmission stuck in second gear, get towed off course without making a lap. Find a transmission from someone in the crowd. Half the team pulls the bad transmission out while the other half head to unnamed persons house to buy overpriced transmission. Manage to swap transmissions in 40 minutes with the help of some very dedicated friends and family...

Hit the track as the last car to attempt qualifying, and I cant link the course, I don't qualify. What a crushing blow, to break through all these obstacles and let myself and my team down! It was a terrible feeling indeed. I can make all the excuses I want, but it came down to preparation. If I can help it I will never be caught in this position again.

I would like to give a huge thanks to my sponsor and team members for all the hard work they put in. It's because they believe in me that I keep fighting.

Special thanks to:

Bryan Lin
Lindsay Riser
David Byrd
Tommy Sanders
Joe Lacy
Daniel Haselton
Charles Woodruff
John Snider
Moetan Thrall

Photo Credits:

Sy Pham
Bryan Lin
Lindsay Riser



Alexander "Axle" Riser
Driver, Team MSA | MSAStore.com | BCRacingDirect.com

Monday, February 11, 2013

Step 2.8: Suspension Overhaul

Over the past couple months we have been developing our suspension to meet a new type of driving style, competitive drifting. This emphasizes a balanced car, not the kind that can lose traction running over a pebble. It uses many serious adjustments to suspension geometry and steering angle to produce a car that not only slides, but does it aggressively, predictably, and with lots of speed.


Tonight I installed S14 to S13 rear subframe conversion bushings from SPL Pro Suspension. Due to time constraints we decided to leave this one up to those who had already traveled the path, and their package does not disappoint. The kit includes spacers, allowing us to adjust our rear roll center and squat characteristics very quickly on track, a key tool in adapting to different courses and drivers.


To correct roll center in the front as well we've made modifications to the subframe. These corrections put the car's front suspension components in a more natural state, closer to the angles they were originally conceived to operate in. This has many advantages for our car, and I cannot wait to feel the difference.

Many custom builds involve more extensive modification to the subframe. For now we've chosen to go with a simpler option. This makes our impressions of how the car has changed much more precise, as we continually add other changes, creating a product that performs and is easy to replicate. We hope to offer a lot of new services for the S13 and S14 chassis after some serious testing. Stay tuned, there's lots more to come.

Alexander "Axle" Riser 
Driver, Team MSA | MSAStore.com | BCRacingDirect.com

Monday, February 4, 2013

Step 2.75: Lighting

Well...at the last event, we had a slight mishap.  During a tandem event.  The lead car hit a cone, sending it into our Driver's headlamp.  Shattering it on impact.  The footage can be seen here.

So after driving one-eyed for a while, we decided it was time for a permanent sleepy eye look.  We pulled a set of Rigid Industries Dually lights off the shelf and made the surgery.  And WOW the light output.  These suckers definitely lit up the road and did their job.

MSA 1989 240sx S13 Drift Car
Rigid Industries Dually  LED Lights as Headlights
MSA 1989 240sx S13 Drift Car
Rigid Industries Dually  LED Lights as Headlights

Bryan Lin
CEO, The Motorsports Authority, Inc. | MSAStore.com | BCRacingDirect.com

Step 1: The Design

MSA 1989 240sx S13 Drift Car
As nice as the two-tone was (sarcasm end here), we had to change the color scheme.  With many sleepless nights and energy drinks, Axle headed up the transformation process to get ol' Kim dressed up in formal wear.  It was rough in the beginning.  There were lots of rust spots.  Nothing that couldn't be handled.  A special Thanks to Ben Chase for assisting on the project!

While Axle was heading up the bodywork and paint, I began Photo-shopping and designing what would be the scheme for Kim.  What should we have as her formal attire and accessories.  Version 1 and 2 were born.  The vote was put out there for our Facebook Fans.

MSA 1989 240sx S13 Drift Car
Version 2 was the clearly chosen winner.  But our wheels would be a matte black.  We then questioned would a matte black stripe look better?  Another vote was put out to our Facebook fans.  The gunmetal stripe stood its ground.  The results would be designing and cutting the vinyl at the very last moment.  And when I say last moment, it was finalized the night before her debut event.  After a few problems (blown up radiator..small things like that), we finally got her dressed and ready for the ball.

MSA 1989 240sx S13 Drift Car
MSA 1989 240sx S13 Drift Car
That night, she started her crusade to Memphis for a Traction Optional Event.  She did pretty well considering the amount of power being produced from her still stock KA motor.

Modifications at this point included:

- BC Racing BR Type Coilovers
- Coilovers with upgraded spring rates
- 16" XXR wheels wrapped in whatever tires were available.
- Competition Clutch Stage 4 Clutch
- Competition Clutch Lightened Flywheel
- Buddy Club Racing Driver's seat (stock in passenger)
- Suspension Techniques sway bars
- All new rubber bushings
- Welded Differential




Bryan Lin
CEO, The Motorsports Authority, Inc. | MSAStore.com | BCRacingDirect.com